+1 408-915-6865
Kenmore Appliance Fault Code Repair Help Resource
When a Kenmore appliance shows an error code, it usually means the unit has detected a problem in one of its main systems. On Kenmore dishwashers, washers, dryers, ranges, wall ovens, refrigerators, and freezers, these alerts often point to control-board faults, interface issues, drain problems, water-level errors, sensor failures, door-lock problems, or temperature-related conditions.
This page gives Bay Area homeowners a practical overview of the main Kenmore appliance error code families and what they usually point to. The goal is to make repeated alerts easier to understand without turning the page into a repair manual. In many cases, the code helps narrow the issue to one operating system, even if it does not confirm the exact failed part.
Hotline Appliance Repair provides local service for major Kenmore household appliances across the Bay Area, including laundry and kitchen units that keep showing warning codes or stop working normally.
What Kenmore Appliance Error Codes Usually Mean
A Kenmore code is usually a system warning, not a final diagnosis. One alert may point to a control problem. Another may suggest a drain fault, a lock issue, a sensor failure, or a temperature-related problem.
Reading Kenmore codes by family makes them easier to understand. Across many Kenmore appliances, the most common patterns involve electronics, user controls, water fill, draining, locking, sensing, and communication faults.
Kenmore Dishwasher Error Code Families
Control, User-Interface, and Sensor-Related Codes
Codes: 1-1 / F1E1 / 1-2 / F1E2 / 2-1 / F2E1 / 2-2 / F2E2 / 3-1 / F3E1 / 3-2 / F3E2 / 4-1 / F4E1
This is the main Kenmore dishwasher code family in your list. These alerts usually point to a stuck relay, damaged control-board memory, a stuck button, communication trouble between the user interface and main control, thermistor or OWI sensor failure, or circulation-pump communication issues.
In daily use, that may show up as a dishwasher that will not start correctly, behaves unpredictably, or stops in the middle of the cycle.
Kenmore Top Load Washer Error Code Families
Control, Sensor, and Lid-Related Codes
Codes: F1 E1 / F1 E2 / F2 E1 / F2 E3 / F3 E1 / F3 E2 / F5 E1 / F5 E2
This is the main Kenmore top load washer code family because it covers some of the most important wash-cycle problems. These alerts usually point to a main control-board failure, motor-control problem, stuck key, control mismatch, water-level pressure-sensor fault, inlet temperature issue, lid-switch fault, or lid-lock problem.
In normal home use, that can mean the washer will not start properly, cannot sense water conditions correctly, or cannot continue the cycle safely.
Kenmore Front Load Washer Error Code Families
Drain, Fill, Lock, and Water-Level Related Codes
Codes: nd / LO / nF / FL / LE / lE / OE / E2
This is one of the most useful Kenmore front load washer code groups for everyday laundry problems. These alerts usually point to a drain problem, door unlock or lock error, water-fill issue, low water level during the cycle, water-level sensor failure, overflow condition, or a stuck button.
In daily use, that may show up as water left in the drum, a cycle that will not start, or a washer that stops before completion.
Kenmore Dryer Error Code Families
Control, Thermistor, Heater, and Moisture-Sensor Codes
Codes: F:01 / F:02 / F:20 / F:22 / F:23 / F:24 / F:25 / F:28 / F:29
This is the main Kenmore dryer code family in your list. These alerts usually point to a main electronic control-board fault, keypad problem, heater relay failure, inlet or outlet thermistor fault, or moisture-sensor issue.
If the same code keeps returning, the dryer usually needs more than a simple reset.
Kenmore Range and Wall Oven Error Code Families
Touch Panel, User-Interface, and Temperature-Related Codes
Codes: F001 / F002 / F003 / F004 / F005 / F010 / F011 / F013 / F015 / F017
This is the main Kenmore cooking-appliance code group. These alerts usually point to a touch-panel failure, user-interface board problem, runaway temperature condition, stuck keypad key, or a UI board that cannot configure the touch panel correctly.
If these codes repeat, the range or wall oven may not respond normally or may have trouble heating safely.
Kenmore Refrigerator Error Code Families
Thermistor, Sensor, and Communication-Related Codes
Codes: C / CF / OP / Er FS / Er rS / F dS
This is one of the most important Kenmore refrigerator code groups because it points to refrigerator or freezer thermistor faults, communication issues between the main board and user interface, open temperature-sensor conditions, or a freezer defrost sensor problem.
In daily use, that can show up as unstable cooling, incorrect temperature readings, or food storage conditions that no longer feel reliable.
Other Kenmore Refrigerator Code Groups
Air Damper Code: d
This code usually points to an air damper issue that can affect airflow and temperature balance inside the refrigerator.
Kenmore Freezer Error Code Families
Communication, Stuck-Key, Thermistor, and High-Temperature Codes
Codes: CE / E7 / E8 / E9 / Temperature Flashing + Control Beeps / d
This is the main Kenmore freezer code family in your list. These alerts usually point to a communication error, stuck key, defective thermistor, high freezer temperature, or a door or door-switch problem.
In daily use, that may show up as warming food, unstable freezer temperature, or controls that stop responding correctly.
What Bay Area Homeowners Should Do First
Check the code together with the way the appliance is behaving. Look for poor draining, fill problems, lid or door issues, temperature warnings, sensor-related trouble, or a cycle that stops before completion.
If the same alert keeps returning or the appliance is no longer working normally, the problem usually needs proper professional diagnosis.
Local Kenmore Appliance Error Code Help in the Bay Area
Repeated Kenmore error codes usually mean the appliance needs more than a reset. If your Kenmore dishwasher, washer, dryer, range, wall oven, refrigerator, or freezer keeps showing the same alert, Hotline Appliance Repair can help identify the likely cause and explain the next repair step for your Bay Area home.
Call Hotline Appliance Repair to Book Your Service
Phone: +1 408-915-6865
Address: 665 Nido, Campbell, CA 95008
Email: hotlineappliancerepair@gmail.com
Open Hours: Monday – Sunday: 8:00 AM – 8:00 PM
Kenmore Code Groups for Bay Area Laundry, Kitchen, and Cooling Repairs
This Kenmore code table gives Campbell, San Jose, and Bay Area homeowners a structured way to read alerts from dishwashers, top load washers, front load washers, dryers, ranges, wall ovens, refrigerators, and freezers. The chart separates each warning into service clues such as drain errors, fill delays, lid or door-lock faults, sensor failures, keypad problems, control-board issues, heating trouble, moisture-sensor faults, cooling changes, and freezer temperature warnings. For model-specific information, compare the code with Kenmore’s official Find Manuals resource
| Error Code | Appliance | Meaning | Safe first steps | Technician required | Related help |
|---|---|---|---|---|---|
| F1 Lo / F1 Hi | Refrigerator | [111 bottom-freezer] Freezer compartment temperature sensor failure | Unplug refrigerator and inspect accessible sensor wiring only. | Yes — if the code returns after the safe checks. | |
| r1 Lo / r1 Hi | Refrigerator | [111 bottom-freezer] Refrigerator compartment temperature sensor failure | Unplug refrigerator and inspect accessible sensor wiring only. | Yes — if the code returns after the safe checks. | |
| i5 Lo / i5 Hi | Refrigerator | [111 bottom-freezer] Ice maker temperature sensor failure | Unplug refrigerator and inspect accessible wiring only. | Yes — if the code returns after the safe checks. | |
| F12 / F13 / F15 / F16 / F17 / F18 / LinE ERR | Range and Wall Oven | [Glass-touch range] Electronic oven control board failure | Disconnect power for 30 seconds and retry once. | Yes — if the code returns after the safe checks. | |
| F20 | Range and Wall Oven | [Glass-touch range] Communication failure between oven control and surface burner control system | Disconnect power. Because live-voltage checks may be required, service is recommended. | Yes — if the code returns after the safe checks. | |
| F:28 / F:29 | Dryer | [Elite dryer] Moisture sensor failure | Unplug dryer and inspect accessible moisture-sensor wiring only. | Yes — if the code returns after the safe checks. | |
| F:31 | Dryer | [Elite dryer] Low L2 voltage | Check breaker and power-cord connection. If supply issue is not obvious, use electrician / service. | Yes — if the code returns after the safe checks. | |
| EE | Dryer | [Hybrid dryer] Main control board failure | Unplug dryer and retry once only. | Yes — if the code returns after the safe checks. | |
| F7 E6 | Top Load Washer | Motor fault | Unplug washer. Do not continue use until motor wiring and drive system are checked. | Yes — if the code returns after the safe checks. | |
| F8 E1 | Top Load Washer | Not filling / long fill time | Confirm supply faucets are open and hoses not kinked. If water supply is okay and code returns, service the valve/control system. | Yes — if the code returns after the safe checks. | |
| LE | Front Load Washer | Low water level during cycle | Check for visible leaks and obvious drain siphoning issues. If not resolved, service is needed. | Yes — if the code returns after the safe checks. | |
| lE | Front Load Washer | Water level sensor failure | Unplug washer and check for a visibly loose sensor harness only. | Yes — if the code returns after the safe checks. | |
| 6-2 / F6E2 | Dishwasher | Water inlet valve failure | Disconnect power. Safe first step is limited to checking whether the harness is visibly loose or damaged. | Yes — if the code returns after the safe checks. | |
| 6-4 / F6E4 | Dishwasher | Float switch is open | Check whether the overfill float is stuck or obstructed. If not resolved, stop use and book service. | Yes — if the code returns after the safe checks. |
