+1 408-915-6865
Fisher & Paykel Appliance Error Code Professional Resource
When a Fisher & Paykel appliance shows an error code, it usually means the unit has detected a problem in one of its main systems. On Fisher & Paykel refrigerators, dishwashers, washers, dryers, washer-dryers, oven ranges, cooktops, and microwaves, these alerts often point to drain problems, fill faults, sensor issues, fan faults, heater problems, overheating, control faults, or communication errors.
This page gives Bay Area homeowners a practical overview of the main Fisher & Paykel appliance error code families and what they usually point to. The goal is to make these warnings easier to understand without turning the page into a repair manual. In many cases, the code helps narrow the issue to one system, even if it does not identify the exact failed part.
Hotline Appliance Repair provides local service for Fisher & Paykel household appliances across the Bay Area, including kitchen and laundry units that keep showing repeat alerts or stop working normally.
What Fisher & Paykel Appliance Error Codes Usually Mean
A Fisher & Paykel code is usually a system warning rather than a final diagnosis. One alert may point to a drain problem. Another may suggest a sensor fault, heater issue, motor problem, overheating condition, or electronics-related failure.
Reading these codes by family makes them easier to understand. Across many Fisher & Paykel appliances, the most common patterns involve filling, draining, cooling, sensing, heating, fan operation, and control-board communication.
Fisher & Paykel Refrigerator Error Code Families
Temperature, Sensor, Fan, and Defrost-Related Codes
Codes: F2 / F3 / F4 / F5 / F6 / F7 / F8 / F9 / F10 / F15 / F16 / F17 / F18 / F22 / F23 / E1 / E2
This is the main Fisher & Paykel refrigerator code family because it covers several common cooling-system problems. These alerts usually point to a defrost fault, temperature or sensor issue, fan problem, or trouble inside the defrost system.
In everyday use, that may show up as unstable cooling, poor temperature control, frost buildup, or a refrigerator that is not operating the way it should.
Other Fisher & Paykel Refrigerator Code Groups
Module Failure Code: F1
This code usually points to a module failure or internal control issue.
Heater or Ambient Fault Codes: F11 / F12 / F13 / F14 / F20 / F21
These alerts usually involve heater faults, ambient sensor problems, or temperature-related system issues.
Ice Maker Code: F29
This code usually points to an ice maker problem or a related control issue.
Display Error Code: F30
This alert usually relates to a display error or a control-interface problem.
Fisher & Paykel Dishwasher Error Code Families
Fill, Drain, Flood, and Motor-Related Codes
Codes: A1 / A3 / F1 / F2 / U1
This is one of the most useful Fisher & Paykel dishwasher code groups because it points to water-supply problems, drain faults, flood conditions, motor-rotor issues, or fill problems.
In home use, that may show up as a drawer that will not drain, a dishwasher that does not fill correctly, or a machine that stops because flood protection has been activated.
Other Fisher & Paykel Dishwasher Code Groups
Electronics Fault Codes: F9 / FC
These codes usually point to electronic control faults or internal communication problems.
Fisher & Paykel Washer Error Code Families
Drain, Communication, Lid-Lock, Motor, and Temperature-Sensor Codes
Codes: Err 37 / Err 105 / E105 / E235 / E700 / 41
This is the main Fisher & Paykel washer code family in your list. These alerts usually point to a blocked drain, communication fault, lid-lock issue, motor error, or temperature-sensor problem.
In real use, that can mean the washer stops mid-cycle, will not lock correctly, or cannot move through the cycle normally.
Fisher & Paykel Dryer and Washer-Dryer Error Code Families
Heating, Thermistor, Drum, Door-Switch, Drain-Pump, and Flood-Protection Codes
Codes: Err3 / E3 / Err4 / E4 / E7 / 151 / E8 / E22 / Err 12
This is the main Fisher & Paykel laundry code group because it covers several important drying and combo-unit problems. These alerts usually point to an exhaust thermistor fault, heater problem, drum failure, door-switch issue, steam-generator drain-pump failure, or a water level that has gone beyond flood-protection limits.
If the same code keeps returning, the appliance usually needs more than a reset.
Fisher & Paykel Oven Range Error Code Families
Overheating, Software, Communication, Sensor, and Power-Board Codes
Codes: A1 / F203 / F303 / F204 / F304 / F212 / F213 / F214 / F220 / Fpot / Fdor / FAdc / FrEL
This is the main Fisher & Paykel oven range code family in your list. These alerts usually point to oven overheating, software faults, control communication problems, power-board issues, cavity-sensor faults, or temperature-sensor related oven problems.
In daily use, that may show up as poor heating control, interrupted operation, or an oven that does not run normally.
Fisher & Paykel Cooktop Error Code Families
Overheating and Technical-Fault Codes
Codes: E / Er / Displayed Fault Code
This is the main Fisher & Paykel cooktop code group. These alerts usually point to overheated electronics, cooling or ventilation issues, or a technical fault on an induction cooktop.
Fisher & Paykel Microwave Error Code Families
Overtemperature, Power-Board, and Technical-Fault Codes
Codes: F10117 / F20117 / F10119 / F20119 / A5 / F+ Number
This is the main Fisher & Paykel microwave code family in your list. These alerts usually point to cavity overtemperature, a damaged power board, microwave overheating, or another technical fault.
If the same code keeps returning, the microwave usually needs proper professional diagnosis.
What Bay Area Homeowners Should Do First
Check how the appliance is behaving along with the code. Look for weak cooling, poor draining, no fill, overheating, lid or door problems, or a cycle that stops before completion.
If the same alert keeps returning or the appliance is no longer working normally, the problem usually needs proper diagnosis.
Local Fisher & Paykel Appliance Error Code Help in the Bay Area
Repeated Fisher & Paykel error codes usually mean the appliance needs more than a reset. If your Fisher & Paykel refrigerator, dishwasher, washer, dryer, washer-dryer, oven range, cooktop, or microwave keeps showing the same alert, Hotline Appliance Repair can help identify the likely cause and explain the next repair step for your Bay Area home.
Call Hotline Appliance Repair to Book Your Service
Phone: +1 408-915-6865
Address: 665 Nido, Campbell, CA 95008
Email: hotlineappliancerepair@gmail.com
Open Hours: Monday – Sunday: 8:00 AM – 8:00 PM
Fisher & Paykel Code Families for Bay Area Home Appliances
This Fisher & Paykel code table organizes key alerts for refrigerators, DishDrawer units, dishwashers, washers, dryers, oven ranges, cooktops, and microwaves into clear fault families for Campbell, San Jose, and Bay Area homeowners. Instead of reading each warning as a random display message, the table shows whether the appliance may be pointing to cooling, filling, draining, heating, fan, thermistor, motor, lid-lock, communication, or control-board issues. For brand-specific details, review Fisher & Paykel’s official Fault Codes support page
| Error Code | Appliance | Meaning | Safe first steps | Technician required | Related help |
|---|---|---|---|---|---|
| F29 | Refrigerator | Ice maker error. | Power reset once and, if available on your model, turn the ice maker off and back on. | Yes — service technician required if the code returns. | |
| F30 | Refrigerator | Display error. | Power cycle the appliance once. | Yes — service technician required if the code remains. | |
| F3, F4, F5, F6, F7, F8, F9, F10, F22, F23 | Refrigerator | Temperature or sensor faults. | Power reset the product once at the wall. | Yes — service technician required if the code returns. | |
| A1 | DishDrawer | Water supply fault. | Ensure the water supply is turned on and the tap filter is not blocked; clear the fault and retest. | Yes — if the fault persists after the safe checks. | |
| A3 | DishDrawer | Drawer cannot drain. | Check the drain hose for kinks / blockage, clear the fault, and retest. | Yes — if the fault persists after the safe checks. | |
| A20 / E20 | Dishwasher | Draining issue. | Check the drain hose is not bent or kinked and the plumbing connection is correct, then retry. | Yes — if the fault persists after the safe checks. | |
| Err 105 | Front Load Washers | Communication error. | Turn the washer off at the power point for 1 minute and restart once. | Yes — service technician required if the code returns. | |
| 41 | Top Load Washers | Temperature sensor fault. | Power reset the washer once. | Yes — service technician required. | |
| E700 | Top Load Washers | Motor error. | Power reset once and retry with a reduced load. | Yes — service technician required if the code returns. | |
| Err3 / E3 | Dryers | NTC1 error (exhaust thermistor error). | Clean the lint filter / airflow path and power reset once. | Yes — service technician required if the code returns. | |
| E22 | Dryers | Steam generator drain pump failed to drain after 8 attempts. | Power cycle the product and make sure any drain / filter items that are user-cleanable are clear. | Yes — service technician required if the code returns. | |
| F212 | Ovens & Ranges | Power board error (steam oven). | Allow the oven to cool completely, then power reset once. | Yes — service technician required if the code returns. | |
| F213 | Ovens & Ranges | Cavity sensor error (steam oven). | Allow the oven to cool completely, then power reset once. | Yes — service technician required if the code returns. | |
| E / Er | Cooktop | Cooktop electronics overheated, or installation / ventilation issue affecting cooling. | Allow the cooktop to cool, check ventilation / clearances, then restart. | Yes — service technician required if the code returns. | |
| F10117 / F20117 | Microwaves | Cavity overtemperature during self-cleaning (1022°F / 500°C). | Allow full cool-down before attempting any restart. | Yes — service technician required if the code remains. |
